Shelburne

The Shelburne’s all-cast construction is a testament to functionality and distinction working hand-in-hand.  Its thick all-cast frame creates a large thermal mass that produces up to 50,000 BTUs per hour, heating up to 1,800 square feet, more than most mid-sized woodstoves.  A large self-cleaning ceramic front door glass optimizes the viewing area and provides easy access to the stove’s spacious 2.0 cubic foot firebox.  Its simple, honest design makes the Shelburne a truly easy-to-operate, user-friendly stove.  Stone Finish: None.  Castings Finish: A variety of HearthStone enamel finishes and matte black 2.0 cubic foot firebox – Spacious firebox accepts up to 19” logs.  Single lever air-intake control– Stove operation is easy; performance is more consistent. Unmatched fire viewing – Air entering the firebox through the stove’s secondary air tubes ignites the gases rising off the burning wood.  The resulting light and flames provide dazzling fire viewing, even when the fire is burning at a low rate.  Non-catalytic combustion system – Clean burning, more complete combustion provides more heat from less wood, greater efficiency, reduced smoke and creosote build-up.  Outside air adaptor (optional) – Improved efficiency in today’s ‘air-tight’ newer homes; reduces cold air drafts along the floor.  Rear heat shield (optional) – Allows more placement options; stove can be installed closer to a wall, because clearance requirements are reduced; creates a convection passageway between shield and back of stove to allow fan to circulate air through house.  Fan with built in thermostat and rheostat (optional) – Helps spread heat evenly throughout home; fan operates only when stove is at significant heat level.  The rheostat controls fan speed. Use of rear heat shield required.